A bath liner with a new wall surround in Benton, AR typically costs $12,500 to $21,000 installed. A custom made acrylic liner fits over the existing tub, and matching wall panels replace the old walls and grout around it. A standard liner and surround sits near the low end, and patterned walls, glass doors and safety extras move it up. Most jobs take as little as one day.
What should bath liners and wall surrounds cost in Benton, AR? That depends on how far you take the scope, the materials you select, and what condition things are in now. This page lays out typical local pricing, the cost drivers that matter, and the way we manage the job end to end.
Labor in Benton runs about 20 percent below the national average, so the ranges below are adjusted to Benton rather than shown as flat national figures. Your exact price still comes from a free in home consultation.
Benton looks like a young suburb on paper and turns out to have one of the strongest cases for an accessible bathroom anywhere in Saline County. The housing is fairly new. Census American Community Survey 2019 to 2023 estimates put the median home at 1995, with 42.2 percent built in 2000 or later and 19.1 percent since 2010. Only 15.3 percent of residents are 65 or older, a little below the state. But among the older residents who are here, the needs run high: 44.3 percent report a disability, 31.6 percent an ambulatory difficulty, and 14.8 percent a self care difficulty, meaning trouble bathing or dressing without help. The Arkansas figures for those last two are 26.4 and 8.6 percent. A self care figure that high usually means someone in the house is helping a parent or spouse bathe, and that changes what a good shower looks like. A caregiver needs room to stand beside the seat, a handheld shower head that reaches without a stretch, grab bars placed for two people, and a threshold low enough to step over easily. A standard builder tub from the 1990s offers none of that. Benton is the Saline County seat and one of the older towns in the region, settled in the 1830s and once known for its salt works and for pottery made from local kaolin clay, so the core of town has older houses mixed among the newer subdivisions; about 14.6 percent of homes predate 1960. Those older homes tend to have smaller baths where a full accessible layout has to be planned inch by inch, while a 2000s house usually has a five foot tub alcove that converts cleanly to a low threshold shower without moving the drain. Owner occupancy sits at 65 percent and the median home value is about $199,400, which puts most Benton projects in the practical middle: a tub to shower conversion or a safety upgrade to an existing shower rather than a full rebuild. Homeowners here can reach the Little Rock showroom on West Markham in a little under half an hour, and the Hot Springs showroom is also within reach, so most choose whichever is closer to work. The measuring visit is where seat height, bar locations and the swing of the door get settled, and it is worth having the caregiver there for it. Independent living difficulty, which Census defines as trouble running errands alone, is reported by 19.8 percent of Benton residents 65 and older compared with 15.1 percent statewide. That is a household where family is already involved, and the bathroom plan should be made with them in the room.
Census figures put the median Benton home at about 31 years old, built around 1995. There are roughly 15,705 housing units here with a median value near $199,400. That makes Benton largely late century construction. Plumbing, wiring, and subfloors are usually close to current practice, and interiors from this period are reaching the end of their first round of finishes, which is the normal time for an update rather than a sign that anything was done wrong. A large share of occupied homes here are rented, so scheduling and approvals often run through an owner or a property manager rather than the person who answers the door. We are used to that, and we keep both parties on the same email so nothing stalls. Values in Benton sit toward the lower end of the markets we serve, so the question is usually which option returns the most service life per dollar, and we will show you the point where spending more stops paying for itself. Those numbers are the starting point for how we plan bath liners and wall surrounds projects in Benton. Figures are U.S. Census Bureau American Community Survey estimates.
These are typical ranges, not quotes. The consultant measures the tub and walls, confirms a liner will fit, and writes up the price.
| Liner and surround option | Typical installed price |
|---|---|
| Acrylic bath liner and wall surround | $12,500 to $16,500 |
| Liner and surround with seat and grab bars | $14,500 to $19,000 |
| Liner with stone look or patterned walls | $14,500 to $20,000 |
| Liner and surround with glass doors | $15,500 to $21,000 |
Figures are typical ranges and vary by project. Your free in home consultation sets the exact price.
Bath Planet of Arkansas measures your project and gives you a clear written estimate at no cost.
We are a local bath and shower installer and we stand behind every job. You are not handed off to a subcontractor. Every job follows the same disciplined process:
A liner fits when the tub underneath is still solid but its surface is worn, stained or chipped. A custom molded acrylic shell goes over it, and new wall panels cover the old walls and grout around it. You keep the tub's plumbing and footprint, so the job is usually finished in as little as one day. If the tub is cracked or the floor is soft, the consultant will tell you a liner is the wrong fix in Benton, AR.
Bath Planet of Arkansas works across the Benton area, including:
Benton is about 22 miles from the Little Rock showroom at 6000 W Markham St, Little Rock, AR 72205, roughly 29 minutes by car. That is close enough that many people drive over to compare wall patterns and fixtures for a bath liners and wall surrounds project before the in home measurement, though nothing requires it.
From the job cards filed after each install, nearest first:
September 2026, in Conway, about 35 miles away: A dated shower surround was detracting from the bathroom's appeal and functionality. We removed the old surround and installed a new smooth wall system featuring a stunning travertine finish. The upgrade included a 60x32 left hand white base, sleek Everest clear bypass doors, and modern Delta fixtures. Additionally, we added a niche shelf and installed two grab bars for enhanced safety, transforming the shower space into a stylish and accessible retreat.
August 2026, in Conway, about 35 miles away: A deteriorating shower surround presented a major inconvenience. We efficiently removed the old surround and installed a new Slab Wi Shower system, featuring a smooth wall in Sandbar. The upgrade included Delta fixtures, a bench seat, shelves, and strategically placed grab bars for safety. The water shut off valve was accessed from the backyard to facilitate the installation.
Yes. Grab bars and a seat can be added during the same install, anchored through the wall panels. A liner and surround with a seat and grab bars typically costs $14,500 to $19,000 installed, compared with $12,500 to $16,500 for the standard package.
A liner is the better choice when the existing tub is solid and the problem is a worn surface, because it keeps the plumbing and footprint and installs in about a day. A new tub is the better choice when the old tub is cracked, flexes or sits on a soft floor. A liner and surround typically runs $12,500 to $16,500 and a full bathtub replacement is priced at the same free visit, so tub condition decides it.
Most liner and surround installs take as little as one day. The old caulk and fixtures come off, the liner is fitted and sealed over the tub, the wall panels go up and the trim and fixtures are reinstalled. Glass doors, typically part of the $15,500 to $21,000 band, are set at the end of the same visit.
A properly fitted liner is sealed at the drain, the overflow and the rim, so water stays on the acrylic surface. That is why the liner is custom molded to your tub rather than a generic size, and why the tub is checked for cracks first. A standard liner and surround typically costs $12,500 to $16,500 installed.
A bath liner with a new wall surround in Benton, AR typically costs $12,500 to $21,000 installed. A standard acrylic liner and surround usually runs $12,500 to $16,500 adding a seat and grab bars brings it to $14,500 to $19,000 and stone look or patterned walls run $14,500 to $20,000. Glass doors typically put it at $15,500 to $21,000.
A bath liner is a custom molded acrylic shell made to fit over your existing tub, usually installed with matching wall panels that cover the old walls and grout. The tub and plumbing stay in place, which is why most liner jobs take as little as one day. A standard liner and surround typically costs $12,500 to $16,500 installed.
The median Benton home was built around 1995 per Census American Community Survey data, so a large share of the housing stock is 31 or more years old. That is the age where bath liners and wall surrounds and the other big updates come due, and it is the work Bath Planet of Arkansas does every week.
Benton looks like a young suburb on paper and turns out to have one of the strongest cases for an accessible bathroom anywhere in Saline County. Bath Planet of Arkansas plans around those specifics from the first visit.
Serving Benton from the Little Rock showroom.
Local, licensed and insured, and proud to do the work ourselves. Tell us about your project and we will give you a clear written estimate at no cost.
Request My Free Consultation →or call (501) 760-5901